Middleware configuration

This section describes the steps to follow to connect with the middelware that will offer the necessary web services.

This task will be carried out in the “Communication Arrangement” Tile and will need to be done manually in each of the systems.

 The steps to be performed on each system to connect with the service provider are described below:

1. Create Communication Arrangements

Open

Next, we select the scenario ID /TBAI/CS_SCPI and complete the field with the name to create the communication arrangement.

Open

2.Create the Communication System

Once the communication arrangement has been created, the communication system must be created in which the host data and authentication data will be indicated through the communications user. To do this, we press the new button and give a name to the communications system created.

In the Communication system, within the “General” tab we will include the hostname provided by the service provider :

3.Create the communication user

Next we will include the communications user provided, which will be an outbound user (“User for Outbound Communication).

The authentication method must be indicated, user/pass in our case. Once included, press Save and return to the Communication Arrangement.

4.Complete the endpoints

Finally, in the “Outbound Services” section we will indicate the endpoints that the communication scenario has.

Below are the endpoints to include for the ticketbai service to work correctly.

Finally you have to save and wait for the activation message to appear.