Installation Guide version 1.3.0

Installation Files

This release releases five support packages for the TESIICNC software component and one support package for the TESIICNS software component. The files to be installed are the following:

• SP7 for component TESIICNC → TESIICNC_100_700_SP7.sar
• SP8 for component TESIICNC → TESIICNC_100_700_SP8.sar
• SP9 for component TESIICNC → TESIICNC_100_700_SP9.sar
• SP10 for component TESIICNC → TESIICNC_100_700_SP10.sar
• SP11 for component TESIICNC → TESIICNC_100_700_SP11.sar
• SP03 for component TESIICNS → TESIICNS_100_700_SP03.sar

These files can be downloaded from the customer portal in the version 1.3.0 section.

Prerequisites

• In order to install SP7, SP8, SP9 and SP10 for the TESIICNC component, it is necessary to have installed the TESIICNC Software Component up to SP6. If these SPs are not available, it is necessary to download them and add them to the installation queue along with the rest of the SPs.
• In order to install the SP3 of the TESIICNS addon, it is necessary to have the TESIICNS component installed with SP2. If these files are not available, it will be necessary to add them to the installation queue.
• To have installed the component (BPCORE) of Licenses: 1.1.2.1 Installation of License Component BPCORE. It is enough to have the component installed to carry out the installation, it is not necessary to wait for the active license.

If the BPCORE component has not been installed in the prerequisites of the TESIICNC component, the following error will occur:

Installation Tasks

1. Log in the system in English with the client 000.
2. In SPAM t-code, load the SPs needed to install. (Detailed in the Installation Installation Files section).
3. Release for installation.
4. Once installed the SPs for both components check that they have been installed correctly up to SP11 for the TESIICNC and SP3 for the TESIICNS. It can be checked through the system status in the component versions.

AIFs Customizing for Canary Islands

Once the installation of the addon is finished, carry out the parameterisation of the AIF for the Canary Islands which are detailed in the following link: 2.2.1. Parametrization of IDA (Canary Islands).

Customizing for CSV Communication 

If the Concilia communication is going to be through CSV (/EDGE/CL_CS_CON_AEAT_CSV - reconciliation from CSVs files downloaded from AEAT), it will be necessary to download a transport order from the customer portal and install it in the system.
This order corresponds to order number OSDK902758 and is a Workbench order, which means that you only need to install it in a single client.
This command can be installed from version 1.1.0 onwards and contains only table information necessary for the correct functioning of the reconciliation through CSV.
If the communication used is different, there is no need to import this command into the system.