Installation guide of 1.2.0. version
- Marina Villalobos Hornillo (Unlicensed)
Installation Files
In this release, two support packages for the software component TESIICNC and one support package for the software component TESIICNS are released. The files to be installed are as follows:
- SP4 for component TESIICNC→ TESIICNC_100_700_SP4.sar
- SP5 for component TESIICNC→ TESIICNC_100_700_SP5.sar
- SP6 for component TESIICNC→ TESIICNC_100_700_SP6.sar
- SP2 for component TESIICNS→ TESIICNS_100_700_SP2.sar
These files can be downloaded from the customer portal in the version 1.2.0 section:
Pre-requisites
- In order to install SP4, SP5 and SP6 for the TESIICNC component, you must have the TESIICNC Software Component installed up to SP3. If these SPs are not available, they must be downloaded and added to the installation queue along with the other SPs.
- To be able to install SP2 for the TESIICNS Software Component, it is necessary to have the TESIICNS component installed with SP1 if you do not have these files you will need to add them to the installation queue.
- Have the Licensing component (BPCORE) installed: 2.1 Installation of BPCORE Licensing Component. It is enough to have the component installed to carry out the installation, it is not necessary to wait for the active license.
If the BPCORE component has not been installed in the prerequisites of the TESIICNC component, the following error will occur.
Installation Tasks
Log on to the system in English with client 000.
In SPAM, load the SPs needed to install. (Detailed in the Installation Files section)
First select the TESIICNS queue. It will display all the files added in the queue for installation:
Release for installation.
Once the SPs for both components have been installed, check that they have been installed correctly.
Settings for communication via CSV
If the Concilia communication is going to be through CSV (/EDGE/CL_CS_CON_AEAT_CSV - reconciliation from CSVs files downloaded from AEAT), it will be necessary to download a transport order from the customer portal and install it in the system.
This order corresponds to order number OSDK902758 and is a Workbench order, which means that you only need to install it in a single client.
This command can be installed from version 1.1.0 onwards and contains only table information necessary for the correct functioning of the reconciliation through CSV.
If the communication used is different, there is no need to import this command into the system.
Avvale 2024