Ir al final de los metadatos
Ir al inicio de los metadatos

Estás viendo una versión antigua de esta página. Ve a la versión actual.

Comparar con el actual View Version History

« Anterior Versión 2 Actual »

Three new support packages are released in this release:

  • SP7 for the TESII component → TESII_100_700_SP7.sar
  • SP6 for component TESIICNC → TESIICNC_100_700_SP6.sar
  • SP7 for the TESIICNC component → TESIICNC_100_700_SP7.sar


These files can be downloaded from the customer portal in the installations section, version 1.7.6 via software component.



Prerequisites

  • To have installed the component of Licenses:1.1.2.1 Installation of License Component BPCORE (if it has not been installed previously with the version 1.7.4). It is enough to have the component installed to carry out the installation, it is not necessary to wait for the corresponding active licenses.
  • To install SP7 for TESII it is necessary to have the TESII Software Component installed up to SP6. 
  • To install SP6 and SP7 for TESIICNC it is necessary to have installed the Software Component TESIICNC up to SP5.

If these last two requirements are not met, it is necessary to load in the installation queue the SPs of both components that are missing until the SPs that are released in this version.


Attention!

DO NOT PLACE TESII SP5 (version 1.7.4) and TESII TOP SPs TOGETHER IN THE INSTALLATION TAIL. INSTALL SEPARATELY.

If for some reason, in the installation process, the higher TESII SP5 and SPs have been installed at the same time in the same SAINT transport queue, two errors may occur in the IMPORT_PROPER phase. Consult the following page in case of errors in this phase:Errors in phase IMPORT_PROPER during the installation of the Add-On.

To check which release of each component the system is in, you can consult the status by accessing "System" in the upper menu:

If you need to download SPs prior to the SPs released in this version, you can consult the following link, section Installable files, where to download these files:1.1.2.3 ECC Installation procedure as a Software Components

Installation Tasks


Installation of SP7 TESII, SP6 TESIICNC and SP7 TESIICNC


Log in the system in English with the client 000.

SPAM transaction.

Upload the three files for the installation, SP7 for TESII, SP6 for TESIICNC and SP7 for TESIICNC. (If it is necessary to load the previous SPs as indicated in the prerequisites).

Once loaded, press

Then select the TESII component.

The pending SPs will appear in green.

Press the green check and in the next pop up, press NO.

Press the release icon.

Select the installation in the background.

If during this process the SPAU and SPDD are skipped, make the necessary adjustments.

Once the process is finished, click on the confirm queue icon.

Check that they have been installed correctly

BC_SETs Activation

Once the SPs necessary for version 1.7.6 have been installed, it will be necessary to activate the BC_SETs that offer the necessary parameterization for the correct operation of this version:BC_SETs activation version 1.7.6

  • Sin etiquetas

Avvale 2024