Installation process

Installation files

This new version releases two new support packages for TESIICNC component and just one support package for TESIICNS component. Files to install are the following:

• SP2 para el componente TESIICNC → TESIICNC_100_700_SP2.sar
• SP3 para el componente TESIICNC → TESIICNC_100_700_SP3.sar
• SP1 para el componente TESIICNS → TESIICNS_100_700_SP1.sar

These three files can be downloaded from the B+ Portal, section 1.1.0:

Prerequisites

To be able to install SP2 and SP3 for TESIICNC, Software Component TESIICNC must be previously installed with the first support package (SP1). If SP1 is not installed, it must be added to the queue with SP2 and SP3.

To be able to install SP1 for TESIICNS, Software Component TESIICNS must be installed.

Installation process

Log in the system in EN, Client 000.

T-code SPAM, load all the SPs that need to be installed.

Select TESIICNC queue and release. Afterwards, do the same with TESIICNS queue.

Check all the SPs have been installed correctly. 

BC_SETs activation

Once all the SPs have been installed, a BC_SET needs to be activated. This BC_SET is released in this version to supply some customizing data.

This BC_SET is: /EDGE/BCSET_CONCILIA_CSV.

To activate the BC_SET follow the next steps:

Go to t-code SCPR20 and introduce the BC_SET name.

Press icon  Consistency Check and verify there is no error.

Once the consistency has been checked, press icon  to activate it.

Press OK as many times as necessary.

This way, the BC_SET has been activated.