...
If version 1.7.6 was NOT previously installed, you will need to activate the BC_SETs of version 1.7.6: Activation BC_SETs version 1.7.6. If version 1.7.7 was NOT installed previously, you will need to activate the BC_SETs of version 1.7.7: Activation BC_SETs version 1.7.7. If version 1.7.8 was NOT installed previously, you will need to activate the BC_SETs of version 1.7.8: Activation BC_SETs version 1.7.8. If version 1.7.9 was NOT previously installed, you will need to activate the BC_SETs of version 1.7.9: Activation BC_SETs version 1.7.9. If version 1.7.9.1 was NOT installed previously, you will need to activate the BC_SETs of version 1.7.9: Activation BC_SETs version 1.7.9.1. If version 1.8.0 was NOT previously installed, you will need to activate the BC_SETs of version 1.7.9: Activation BC_SETs version 1.8.0. The BC_SET that is provided with version 1.8.1 is as follows:
/EDGE/SII_BC_SET_SP13_SIN_MDNT It is not necessary to activate it in each available client because the information it contains is independent of client. BC_SET activation
/EDGE/SII_BC_SET_SP13_CON_MDNT It is necessary to activate it in each available client because the information it contains is client dependent. BC_SET activation
To activate the BC_SET use transaction SCPR20. In this order:
/EDGE/SII_BC_SET_SP13_SIN_MDNT.
/EDGE/SII_BC_SET_SP13_CON_MDNT.
| Advertencia |
|---|
Before checking consistency in the first BC_SET, the entry /EDGE/SII_PRO_SR must be entered in the SCPRSTAM table, otherwise it will give an error. |
Press the Consistency Check icon and verify that no error occurs.
...
Once the consistency has been checked, press the icon to activate it.
...
A Workbench transfer order will be requested.
We press OK as many times as necessary.
In this way the BC_SET would be activated.
It may be that after completing the activation a message with information about the activation will appear:
Termination with warnings
...
To view these warnings, click on the log icon:
...
The same warnings that were displayed when performing the BC_SET consistency will appear.
Notes on activating each BC_SET
/ EDGE / SII_BC_SET_SP13_SIN_MDNT
During the activation of BC_SET / EDGE / SII_BC_SET_SP13_SIN_MANDANT, a Workbench transfer order will be requested. To verify that it has been activated correctly, you must check that the following tables have been included in the transfer order:
...
/EDGE/SII_BC_SET_SP13_CON_MDNT
During the activation of the BC_SET/EDGE/SII_BC_SET_SP13_CON_MANDANT, a Customizing transfer order will be requested. To check that it has been activated correctly, check that the following table has been included in the transfer order:
...
| Info |
|---|
BC_SETs are only activated in the development environment. For the custo to reach the rest of the environments, the transport orders generated when activating the BC_SETs under development will be transported. |