Why I decided to cover my car with vinyl film: personal experience and result

I recently bought my long-awaited car, and naturally I wanted to protect its appearance and give it a more stylish and bright look. After much thought and consultation with friends, I decided to car wrapping near me. I will say right away - this turned out to be an excellent solution, which not only improved the appearance of the car, but also provided additional protection for the paint coating.

Open

Why did I decide to cover the car with vinyl film?

At first, I had a desire to somehow distinguish my car from the multitude of others on the roads. I wanted to make it more attractive by adding something unique and modern. Car repainting seemed to me not the most practical idea due to its high cost and complexity of the process. Then I learned about such a solution as car vinyl wrap, and began to study this option.

The main reasons why I chose vinyl film were the following:

1. Protection of the paint coating

The most important factor for me was the protection of the car body. During operation, the body is constantly exposed to various factors: ultraviolet rays, road dust, chemical reagents, small stones and sand. Pasting with a vinyl film allows you to protect the paint coating from all these adverse effects. At the same time, if the film is damaged, it can be easily replaced, while preserving the factory coating of the car.

2. The ability to change the appearance of the car

Another important point for me was the opportunity to personalize the car. Vinyl film allows you to experiment with different colors and textures. There are matte, glossy, chrome and even carbon films. After much thought, I settled on a rich glossy color, which gives the car a brighter and more stylish look.

3. The affordable cost of pasting the car

When I studied the issue of pasting, one of the decisive factors was the cost of pasting the car. Of course, the cost depends on the type of film, the complexity of pasting and the size of the car. But, in general, the cost of pasting with vinyl film turned out to be much lower than repainting. In addition, this is a temporary solution: the film can be removed at any time, returning the car to its original color.

4. Fast and non-invasive process

The process of pasting the car with vinyl film turned out to be quite fast. The whole process took only a few days, including surface preparation and pasting itself. In addition, unlike repainting, there is no need to disassemble the car body. This aspect became one of the decisive ones for me, since I did not want to leave my car in the service for a long time.

What result did I get?

When I first saw my car after pasting, I was delighted. The new glossy color gave the car a completely different look - it began to look modern and elegant. The vinyl film added a light shine to the body, which immediately draws attention to the car.

1. Ease of care

One of the pleasant bonuses that I noticed after pasting is the simplification of body care. Now my car gets less dirty, and mud and dust are easily washed away with ordinary water. The film is also resistant to small scratches and chips, which saved me from worrying about small damages.

2. Long-term protection

Several months have passed since pasting, and I can say with confidence that the vinyl film fully justifies itself. The paintwork under the film is preserved in its original form, which is especially important for those who plan to sell the car in the future. This approach will help keep the body in excellent condition and possibly increase the car's value on the secondary market.

3. Possibility of experiments

Now, when I have experienced wrapping with a film on my car, I understand that at any time I can change the appearance of the car without much effort. I want to update the color or add some graphic element - it is enough for me to contact the service for applying a new film. This gives a huge space for creativity and self-expression.

The cost of pasting the car

When it came to the question of the car wrapping cost, I was convinced that prices vary depending on various factors. The main ones are the size of the car, the type and quality of the film, as well as the complexity of the work (for example, pasting doorways, mirrors, bumpers and other complex elements).

My choice fell on a high-quality film of the middle price segment. For pasting the entire body, the cost was approximately 60,000 rubles. Of course, you can find cheaper options, but here it is important to take into account the quality of the material and the professionalism of the craftsmen. I chose a verified service with positive reviews and did not regret it - the film was applied evenly, without bubbles and irregularities, and the edges were neatly tucked under the cladding.

Conclusion

Wrapping a car with vinyl film is an excellent solution for those who want to protect the body and give their car a unique appearance at the same time. I was completely satisfied with my choice. The car looks fresh, bright and modern, and the protection of the body from external influences is no longer a concern for me.

If you are thinking about wrapping your car, I recommend considering this option. The cost of wrapping a car is fully justified considering the advantages it provides: protection against minor damage, ease of maintenance and the possibility of updating the appearance.