Every car owner strives to protect it as much as possible from damage and extend its service life for as long as possible. To do this, they undergo routine technical inspections, use protective oils and cover the car with special protective films. If you don’t yet know what ppf car is, how it can protect it, or don’t know the secrets of wrapping it, this article will be very useful for you and your vehicle.

Open

Before considering the features and advantages of films, as well as considering how to glue armored film to a car, it is necessary to indicate that there are two main purposes:

• decoration;

• protection of the body from external damage in the form of chips and scratches.

As for the types of films, there are a large number of them. Decorative models were developed specifically for car tuning, and in most cases they are used as a cheaper and more profitable alternative to painting. However, what a protective film on a car is can be understood already from its name - it is designed to protect the surface of the body or its individual elements from mechanical damage from the outside.

Protective films on cars can be matte or glossy, as well as special films designed for gluing small elements: mirrors, headlights, etc. Depending on the type and purpose of the product, how to glue the protective film on a car will also differ. In some cases, this can be done on your own, and in others, only with the help of professional auto repair shops.

Anti-gravel protective film was originally developed for military-industrial purposes to protect helicopters from sand. Afterwards it began to be actively used for wrapping racing cars in Formula 1. More recently, anti-gravel film has become available for “civilian” use, which is why many have wondered how to stick a protective film on the hood of a car with their own hands. This allows you to save not only on coloring, but also on payment for such a service. This option may not always be productive, since some types require the use of special equipment for gluing.

There is another type of auto films that was developed specifically for the advertising business. Their main purpose is to protect billboards and light boxes. Today they have also found application in the automotive sector. Here, in the question of how to stick a protective film on a car yourself, there are also some nuances, which we will discuss below.

Protective films can be used for covering any cars, as well as their individual elements. Thanks to technological progress, modern car films have a large list of advantages:

• protection from external damage;

• reducing the negative impact of the environment;

• this is a cheap alternative to painting a car after minor damage;

• protection against ultraviolet rays and car color fading.

Additionally, there are no special nuances in the questions of how to stick a protective film on a car and safely dismantle it afterwards - everything is quite simple and accessible. In addition, after dismantling, protective films leave no traces, which is also their significant advantage.

How to stick protective or armor film on a car

Not everyone can cover their car with protective film on their own. This process requires special attention and certain skills. Everything regarding questions of how to stick a protective film on the hood of a car and how to do it quickly and efficiently, it is better to rely on the help of professionals.

If you are confident of success, you can do it yourself. Before you get started, thoroughly wash your car and clean it of any dirt. Make sure that there is no damage to the body - the film will not hide them, but will only enhance the negative impression.

Then, using a stationery knife, make a pattern of the elements that you will paste over. Mark the body gaps on the film with small knife marks. Having cut out the necessary elements, proceed to pasting:

• attach the element to a place on the body (the front side should be down);

• peel off the (liner) paper backing;

• make sure that there are no folds on the surface;

• moisten the surface generously with a spray bottle of soapy water.

Complete the procedure by smoothing the film using a squeegee. Move from the center area to the edges to avoid the formation of bulges and unevenness.

How to stick protective film on a car hood

The scheme for covering the car hood with protective film is the same as for any other parts of the car. The only major difference is the size of the canvas you will have to cut.

Actually, this is the main complexity of the process - smaller elements are easier to smooth out and the risk of forming bulges and irregularities is much lower. Therefore, in matters of gluing, as well as where to buy protective film for a car, it is better to consult with experts or completely entrust this process to them.

How to glue carbon fiber to a car

Carbon films have their own characteristics of the gluing process. To do this, you will need a certain set of tools and appropriate temperature conditions. It is also very important to find a reliable manufacturer and place of sale of carbon films. The success of the result you achieve will depend on the quality of the product.

The pasting process should be gradual, you will have to move smoothly from one edge to the other. When peeling off part of the protective layer, be sure to smooth the surface with a squeegee. To make it glide smoother, use microfiber attachments .

Another important point about how to glue carbon fiber to a car is to prevent air from penetrating under the film. If such a problem does happen, use a regular hair dryer. To do this, you will need to peel off the film a little after warming up the problem area with a hairdryer and smooth out the resulting bulge.

After you finish wrapping, try to keep the car free of moisture for 24 hours. It is better if you do not use it during this period.